Mobile Hot Mix Plant

Product Details:

As an esteemed name in the relevant industry, we bring forth a distinguished assortment of Mobile Hot Mix Plant. By following industry set parameters, we manufacture this mix plant by utilizing premium quality components and the latest technology. Our quality examiners test this mix plant against various quality measures in order to ensure its flawlessness. Clients can avail this mix plant from us at industry leading prices.

Features:

• Rugged construction
• Consistent performance
• Easy to install

Type & Model:

• ''Speedcrafts'' Bitumen Mobile Hot Mix Plant, Model SBM-10, capacity 6/10 mt. per hour, generally conforming to IS:5890

Power Unit:

• Powered by Simpson S4(I) / Kirloskar RB-33 water cooled diesel engine developing 41.5/37.5 bhp @ 1500 rpm with 12 V electric starting arrangement
• The unit is fitted with a power take-off clutch and reduction gear box

Feeder:

• A bucket elevator is provided, which discharges aggregate into the drying cylinder through the feeding ring

Drying Cylinder:

• The drying cylinder is 2 mtrs. in length and of 0.70 mtrs. diameter and is fitted with replaceable lifting flights
• Guide rollers and is driven by chain and sprocket wheel

Aggregate Burner:

• A single burner, having approximate fuel consumption of 28 ltrs./hr. is fitted to the discharge end of the drying cylinder
• The fuel consumption depends on the condition of the aggregate

Air Blower:

• It is driven by the engine through a v-belt and is of suitable capacity for the burners provided

Storage Ring:

• The storage ring is fixed to the discharge end of the drying cylinder and is fitted with lifting buckets which discharge the hot aggregate into the batching chute

Batching Chute:

• The discharge of hot aggregate from chute to paddle mixer is by means of a lever which carries out two operations simultaneously- it opens the radial door for discharging the aggregate into the paddle mixer

Drum Hoist:

• A wire rope hoist is provided with lifting frame for easy and convenient loading of bitumen from barrels into the boiler

Bitumen Boiler:

• The bitumen boiler is of adequate capacity and is provided with a burner and suitable heating arrangement to prevent the bitumen from catching fire

Bitumen Feed Pump:

• A bitumen pump is provided with the bitumen boiler
• It is driven by chain and sprocket from the line shaft

Bitumen Bucket:

• A calibrated bucket is provided in which the molten bitumen is collected for discharge, as required, into the pugmill

Mixing Drum:

• The aggregate and bitumen are mixed in a separate paddle mixer type drum, fitted with two paddle shafts mounted with arms and tips which rotate in opposite directions
• The shafts are gear driven and mounted on lubricated gunmetal bushes
• The paddle tips are coated with special hard facing alloy to give them longer life in operation and are also replaceable.

Chimney:

• A chimney is provided to draw out the hot gases
• A sliding door is also fitted which collects the fine dust in the chimney box

Chassis:

• The whole unit is mounted on a strong chassis of welded and bolted construction with rolled and folded steel sections and fitted with 4 nos

Optional:

• Insulated bitumen boiler, overrun and parking brakes

Additional Information:

• Item Code: SBM-10